Skip to main content

Permit planning guide

Know who reviews your HVAC project before the equipment is ordered.

Orange County permits are issued by the agency with jurisdiction over your address, and California's 2025 Energy Code treats replacements differently from repairs. This guide helps you ask the right questions.

Checking current business hours

This guide summarizes published state and local sources to help you plan a conversation. It is not legal advice, a code ruling, or a permit application, and Breezy does not state fees or review timelines for any jurisdiction. Confirm requirements for your address with the building department that has jurisdiction.

Sources reviewed as of 2026-11-15

A short decision path

Five questions that decide what your project actually needs.

Each step narrows the question from the address to the paperwork. The answers depend on your property and scope, so treat the checks as the limits of what a general guide can tell you.

01

Confirm which agency has jurisdiction over the address

California building standards are enforced by local agencies, and the Energy Code calls those agencies Authorities Having Jurisdiction. In Orange County that is usually the city building department, while OC Development Services handles private property in the unincorporated areas and County-owned property.

Check before assuming: A mailing address with a city name does not prove the property sits inside that city. Unincorporated islands exist between cities, so confirm the boundary before assuming who reviews the project.

California Energy CommissionOC Development Services, OC Public WorksOC Public Works Survey/Geospatial Services

02

Identify the property and building type honestly

The California Energy Commission publishes separate compliance manuals for single-family, multifamily, and nonresidential buildings. The single-family rules described on this page come from the single-family manual and do not automatically describe a condominium, apartment building, or commercial property.

Check before assuming: If the building is multifamily or commercial, treat the single-family examples as background only and ask the building department which manual applies.

California Energy CommissionCalifornia Energy Commission

03

Separate a repair from a replacement

The single-family manual defines a repair as reconstruction or renewal for maintenance of a component, system, or equipment. Replacing a component, system, or equipment that the Energy Code covers is treated as an alteration rather than a repair, and the manual states that the Energy Code does not apply to building repairs.

Check before assuming: Energy Code scope and local permit requirements are different questions. Work that falls outside the Energy Code can still need a mechanical permit from the local department, so confirm the permit question with the agency.

California Energy CommissionOC Development Services, OC Public Works

04

Ask which measures in this specific scope require field verification

Residential field verification and diagnostic testing now runs through the Energy Code Compliance program, which replaced the HERS field-verification program with the 2025 Energy Code. Participation is required when the project scope includes features that must be tested, and the required measures are identified on the project's certificate of compliance.

Check before assuming: Which tests apply depends on the actual scope, so the certificate of compliance is the place to confirm them rather than a general assumption about replacements.

California Energy CommissionCalifornia Energy Commission

05

Track the compliance documents through final inspection

Single-family compliance uses a certificate of compliance (CF1R), certificates of installation (CF2R), and certificates of verification (CF3R). When verification is required, these documents are registered with an approved provider, and the manual notes that the enforcement agency cannot approve an HVAC alteration until it has a registered CF1R, CF2R, and CF3R for the altered system.

Check before assuming: The manual also requires the installing contractor to provide copies to the homeowner, so keep the registered documents with your property records.

California Energy CommissionCalifornia Energy Commission

How Breezy handles it

Permit first. Verified by a third party. Closed with a final inspection.

Once a quote is approved, Breezy pulls the permit before the work starts, completes the work after the permit is approved, arranges third-party verification of the installation, and then calls for the final inspection from the city or county that has jurisdiction.

  1. 01

    Quote approved

    The written quote is approved before any permit is filed or equipment is ordered.

  2. 02

    Permit pulled first

    Breezy applies for the permit with the city or county that has jurisdiction over the address. Work starts after the permit is approved, not before.

  3. 03

    Installation

    The approved scope is installed to the manufacturer's installation instructions and the requirements the permit carries.

  4. 04

    Third-party verification

    Breezy arranges an independent rater to verify the installation. Under the 2025 Energy Code that field verification runs through the Energy Code Compliance program, which replaced the HERS field-verification program for permit applications on or after January 1, 2026.

  5. 05

    Final inspection

    Once verification is complete, Breezy requests the final inspection from the city or county and closes the job when it passes.

Permit fees, review times and which measures require field verification are set by the jurisdiction and the Energy Code for the specific scope, not by Breezy.

What the 2025 Energy Code says

Testing depends on the scope, not on the word “replacement.”

These points come from the California Energy Commission's single-family material. They describe single-family work and do not automatically describe multifamily or commercial projects.

Which code version applies depends on the permit application date

Buildings whose permit applications are applied for on or after January 1, 2026 must comply with the 2025 Energy Code. A project permitted under an earlier code version remains subject to the version effective when it was permitted.

California Energy CommissionCalifornia Energy Commission

Equipment changes can trigger duct sealing and leakage verification

In single-family alterations, the manual states that the duct system connected to altered equipment must be sealed by the installer and verified by an ECC-Rater when an air handler is replaced, when a split-system outdoor condensing unit is installed or replaced, when a packaged system is completely replaced, or when a cooling or heating coil is installed or replaced.

California Energy Commission

The same manual lists exceptions, so testing is not universal

Duct sealing and leakage verification are not required for ducts already sealed, tested, and certified by an ECC-Rater, for duct systems totaling less than 40 feet of duct, or for duct systems containing asbestos. Targets also differ by situation: altered systems generally work to a 10 percent leakage target, or 7 percent to outside, while an entirely new duct system has a 5 percent target.

California Energy Commission

Refrigerant charge verification depends on equipment and climate zone

The manual ties refrigerant charge verification to heat pumps in all climate zones and to air conditioners in climate zones 2 and 8 through 15, and describes it as applying when a refrigerant-containing component is replaced or installed in an existing house. Because this varies, confirm the climate zone and equipment type for the specific address instead of assuming.

California Energy Commission

HVAC changeouts have a documented registration timing allowance

To simplify the permit process for HVAC changeouts, the manual explains that the registered CF1R-ALT-02 document may be submitted to the enforcement agency at final inspection rather than before obtaining the permit. The ECC program material describes the same exception for urgent alterations, with registration completed before the permit is closed.

California Energy CommissionCalifornia Energy Commission

Choosing equipment is a separate decision from permitting it. If you are still weighing configurations, the system comparison guide covers the trade-offs before the permit conversation begins.

Find your jurisdiction

Start from the address, then go to that department directly.

Breezy does not publish permit fees or review timelines for any jurisdiction, because those are set and changed by each agency. Use the official pages below for current requirements.

OC Land Insights public map

The County's public geospatial viewer includes Jurisdictions, Cities, and Unincorporated Islands layers and an address search, so you can see which jurisdiction a property falls in before contacting a department.

Open the County jurisdiction map

OC Development Services building permits

Handles building permits for private property in the unincorporated areas of Orange County and for County-owned property, and lists HVAC systems among the project types that typically require a permit.

Open the official department page

Huntington Beach Permit Center

Processes construction permits for the City, including mechanical permits, and publishes its own code-adoption and application notices.

Open the official department page

Newport Beach building permits and plan check

City page linking building permit applications, submittal requirements, online permits, and inspection scheduling. Newport Beach also requires a condenser noise analysis with the mechanical permit: see the FAQ below.

Open the official department page

Laguna Beach Building & Permits

City Building Division page covering permit applications, the public permit portal, inspections, and building permit records.

Open the official department page

Dana Point Building & Safety

City division that issues permits and performs plan review and inspections for building, plumbing, mechanical, and electrical work.

Open the official department page

These coastal departments are listed as official starting points for common Breezy service areas. Orange County has many more jurisdictions, so confirm yours on the map above rather than assuming the nearest city applies.

Newport Beach adds a sound calculation to the permit

In Newport Beach, a mechanical permit to install an A/C condenser requires a noise analysis submitted with the plans: the manufacturer's data sheet with the unit's decibel rating, a site plan with the distance from the equipment to the neighbor's nearest outdoor living area or nearest window, whichever is closer, and a calculation using AHRI Standard 275.

Municipal Code Section 10.26.045 allows a calculated level of up to 50 dBA at that point of evaluation, or up to 55 dBA if the unit is installed with a timer that shuts it off between 10 p.m. and 7 a.m. Up to 65 dBA is allowed only with the written consent of all affected property owners on the city's consent form.

The city's worksheet gives a shielding credit for a solid barrier such as a heavy continuous wall and states that a typical wood fence is not adequate for that credit, so the wall or fence between the properties changes which equipment qualifies.

A noise violation is an infraction under Section 10.26.075; the code allows a written notice for an initial violation with a deadline to correct it, and the general exterior standard for residential property is 55 dBA by day and 50 dBA between 10 p.m. and 7 a.m., measured in the neighbor's yard, patio, deck or balcony rather than at the fence line.

Breezy prepares the site plan, the equipment data and the AHRI 275 calculation as part of the permit package for Newport Beach addresses and selects equipment that meets the calculated limit for the specific placement.

City of Newport Beach Building DivisionCity of Newport Beach

Common questions

Answers that stay inside what the sources support.

Does every Orange County HVAC replacement require the same duct and refrigerant tests?

No. California's single-family compliance manual lists specific triggers for duct sealing and leakage verification, such as replacing an air handler, outdoor condensing unit, packaged system, or coil, and it also lists exceptions, including duct systems under 40 feet and systems containing asbestos. Refrigerant charge verification depends on equipment type and climate zone. The measures that apply to a particular job are identified on that project's certificate of compliance.

California Energy CommissionCalifornia Energy Commission

Which building department reviews my HVAC permit in Orange County?

It depends on whether the property sits inside a city or in an unincorporated area. Cities run their own building departments, while OC Development Services handles private property in unincorporated Orange County and County-owned property. The County's public map includes Jurisdictions, Cities, and Unincorporated Islands layers with address search, which is a practical way to confirm the boundary before you call.

OC Development Services, OC Public WorksOC Public Works Survey/Geospatial ServicesCalifornia Energy Commission

Is a repair treated the same as a replacement under the Energy Code?

Not under the Energy Code. The single-family manual defines a repair as reconstruction or renewal for maintenance, treats replacement of covered equipment as an alteration, and states that the Energy Code does not apply to repairs. That distinction is about Energy Code scope only. Local permit requirements are set by the building department, so confirm the permit question with them.

California Energy CommissionOC Development Services, OC Public Works

What changed with the 2025 Energy Code and the HERS program?

Permit applications submitted on or after January 1, 2026 must comply with the 2025 Energy Code. Residential field verification and diagnostic testing moved into the Energy Code Compliance program, which replaced the HERS field-verification program, so 2025-based forms and registries use ECC terminology instead of HERS.

California Energy CommissionCalifornia Energy Commission

Does Breezy pull the permit, or is that left to the homeowner?

Once a quote is approved, Breezy pulls the permit before the work starts, completes the work after the permit is approved, arranges third-party verification of the installation, and then calls for the final inspection from the city or county that has jurisdiction. Permit fees, review times and which measures require field verification are set by the jurisdiction and the Energy Code for the specific scope, not by Breezy.

California Energy CommissionOC Development Services, OC Public Works

Why does a Newport Beach condenser permit need a sound calculation?

In Newport Beach, a mechanical permit to install an A/C condenser requires a noise analysis submitted with the plans: the manufacturer's data sheet with the unit's decibel rating, a site plan with the distance from the equipment to the neighbor's nearest outdoor living area or nearest window, whichever is closer, and a calculation using AHRI Standard 275. Municipal Code Section 10.26.045 allows a calculated level of up to 50 dBA at that point of evaluation, or up to 55 dBA if the unit is installed with a timer that shuts it off between 10 p.m. and 7 a.m. Up to 65 dBA is allowed only with the written consent of all affected property owners on the city's consent form. The city's worksheet gives a shielding credit for a solid barrier such as a heavy continuous wall and states that a typical wood fence is not adequate for that credit, so the wall or fence between the properties changes which equipment qualifies. Breezy prepares the site plan, the equipment data and the AHRI 275 calculation as part of the permit package for Newport Beach addresses and selects equipment that meets the calculated limit for the specific placement.

City of Newport Beach Building DivisionCity of Newport Beach

Which compliance documents should I end up with after a permitted changeout?

Single-family projects use a certificate of compliance (CF1R), certificates of installation (CF2R), and, where testing applies, certificates of verification (CF3R). The manual states the enforcement agency cannot approve an HVAC alteration until it has a registered CF1R, CF2R, and CF3R for the altered system, and that the installing contractor provides copies to the homeowner.

California Energy CommissionCalifornia Energy Commission

The next measured step

Planning a replacement or changeout?

Share the property, the equipment, and what you already know about the existing ductwork. We will help you line up the right conversation with your building department.