Skip to main content

Clear-to-Close HVAC Inspection

The HVAC answer, in writing, before escrow asks for it.

A $175 inspection by a licensed contractor that documents the heating and cooling system at the property, how it ran and what comes next. Sellers use it before the buyer's inspector arrives. Buyers use it before the investigation period ends. Agents use it to keep the file moving.

Checking current business hours

$175. Regular-hours pricing. The first two hours on one system are included and each additional hour is $175. The fee is waived when approved work or a recommendation exceeds $1,000. Planning information, not legal advice. Your purchase agreement controls every date, and your agent or attorney decides how a disclosure applies to your file.

Sources reviewed as of 2026-11-15

Fee
$175
Included
2 hrs
Report
Written

Three seats at the table

One report. Three people who need it for different reasons.

Each seat reads the same written findings. What changes is the moment it is worth the most.

Seller

Before the buyer's inspector arrives

A general home inspection is a noninvasive examination that reports what did not operate. Open HVAC items surface during the buyer's investigation period and become the basis for a repair request. Ordering the Clear-to-Close first puts the findings in your hands while you still choose what to resolve.

The move: Order before listing, or before the inspection period opens. California requires you to disclose what the report found; you decide what to repair.

Bus. & Prof. Code §7195Civil Code §1102.1

Open the seller playbook

Buyer

Before the contingency ends

The disclosure package tells you what the seller knows. The home inspection tells you what ran. Neither is designed to tell you what the system will cost to own. The report puts condition findings and next steps in writing so the number goes into your budget instead of arriving after close.

The move: Book early in the investigation period. The C.A.R. pre-printed default is 17 days after acceptance, and it is negotiable.

DRE disclosure guide (RE 6)C.A.R. purchase agreement

Open the buyer playbook

Agent

Keep the file moving

One licensed contractor's written findings that both sides can read. On the listing side, fewer open items when the inspection period opens. On the buyer side, a repair or credit request built on a contractor's findings rather than a line in a general report.

The move: Send the address, the close or contingency date, the inspection report language and who meets us at the door.

C.A.R. Form RR

Open the agent playbook

What the written report contains

Five things the file is missing until someone measures the system.

A licensed technician operates and measures the heating and cooling system at the property and documents the equipment, its age where legible, how it ran, condition findings and recommended next steps in a written report the buyer, seller or agent can share.

  1. 01

    The equipment, documented

    What is installed at the property, recorded from the equipment itself rather than from the listing.

  2. 02

    Age, where legible

    Manufacture dates read from the data plates when they are still readable, so the remaining-life conversation starts from a fact.

  3. 03

    How it ran

    The system is operated and measured by a licensed technician during the visit, not described from the thermostat.

  4. 04

    Condition findings

    What was observed, stated plainly enough for a buyer, a seller and two agents to read the same way.

  5. 05

    Recommended next steps

    What should be addressed now, what can wait, and what deserves a written quote, so the number belongs in a budget.

It is an HVAC-only evaluation by a licensed contractor. It is not a general home inspection, a code compliance ruling or a warranty on the equipment, and Breezy does not promise to meet a contingency deadline.

Seller's playbook

Walk in knowing more than the buyer's inspector will.

  1. 01

    Order it before listing, or before the inspection period opens.

    The visit takes place inside regular hours and the report is yours to act on. The earlier it lands, the more of the schedule you control.

  2. 02

    Decide what to resolve.

    Repairs are your call. Fewer open HVAC items when the buyer's inspector arrives means fewer items for a Request for Repair to be built on.

    C.A.R. Form RR

  3. 03

    Disclose what you received.

    California's disclosure statute counts previously received reports of physical inspections among the facts materially affecting value and desirability. The report is disclosed whether or not you repaired what it found.

    Civil Code §1102.1DRE disclosure guide (RE 6)

  4. 04

    Deliver the report when the buyer asks.

    Civil Code Section 1102.4 treats delivery of a report prepared by a licensed contractor, on matters within the license, as sufficient compliance for the seller's and agents' error-or-omission exemption on those matters. Ask your agent or attorney how that applies to your file.

    Civil Code §1102.4

Buyer's playbook

Turn the HVAC unknown into a line in the budget.

  1. 01

    Book in the first days of the investigation period.

    The C.A.R. sample contract gives the buyer 17 days after acceptance by default to complete investigations and review disclosures. Breezy publishes no arrival window and makes no commitment about a contingency deadline, so ask early rather than late.

    C.A.R. purchase agreement

  2. 02

    Bring the disclosure package and the home inspection report.

    The Transfer Disclosure Statement says on its face that it is not a warranty and not a substitute for inspections. The report builds on both documents instead of repeating them.

    DRE disclosure guide (RE 6)

  3. 03

    Read the next steps as capital, not as a verdict.

    What should be addressed now, what can wait, and what deserves a written quote. If replacement is likely, the sizing conversation follows Manual J, the ANSI-recognized residential load standard, and Breezy includes it with every full residential installation.

    ACCA Manual J

  4. 04

    Use the findings in a Request for Repair if one is warranted.

    C.A.R. Form RR lets a buyer ask for repairs, a credit or a price change. The seller has no obligation to agree or to respond, so a licensed contractor's written findings carry the conversation further than a general line item.

    C.A.R. Form RR

The escrow clock

Where the inspection fits.

Day counts are the pre-printed defaults in the C.A.R. sample purchase agreement, counted from acceptance. Every one is negotiable and your signed contract controls.

  1. Pre-listing

    Seller's window

    Order the Clear-to-Close, decide what to resolve, prepare the disclosure package.

  2. Day 0

    Acceptance

    The contract clock starts.

  3. Day 7

    Seller documents

    Default deadline for the seller to deliver reports and disclosures.

  4. Day 17

    Investigation contingency

    Default deadline for the buyer's investigations, disclosure review and appraisal contingency. The buyer's Clear-to-Close belongs inside this window.

  5. Day 21

    Loan contingency

    Default deadline for loan contingency removal.

  6. Close

    Recorded

    The HVAC number is already in the budget.

C.A.R. purchase agreement

Agent's desk

What to send, and what comes back.

Send

  • Property address and the jurisdiction if you know it
  • Close date and the contingency date that matters
  • The HVAC language in the home inspection report and the disclosures
  • Who meets us at the door and when the property is available

Receive

  • A written report both sides can read
  • Next steps a buyer can budget and a seller can price
  • A written quote when the report points to work, with Manual J on every full residential installation

Regular hours are Monday–Friday, 8 AM–5 PM Pacific. Same-day response by phone, text, or email for scheduling purposes. After-hours service calls are available by arrangement. Contact Breezy to confirm availability, timing, and the applicable fee.

Newport Beach listings

When the report points to replacement in Newport Beach.

In Newport Beach, a mechanical permit to install an A/C condenser requires a noise analysis submitted with the plans: the manufacturer's data sheet with the unit's decibel rating, a site plan with the distance from the equipment to the neighbor's nearest outdoor living area or nearest window, whichever is closer, and a calculation using AHRI Standard 275.

Municipal Code Section 10.26.045 allows a calculated level of up to 50 dBA at that point of evaluation, or up to 55 dBA if the unit is installed with a timer that shuts it off between 10 p.m. and 7 a.m. Up to 65 dBA is allowed only with the written consent of all affected property owners on the city's consent form.

The city's worksheet gives a shielding credit for a solid barrier such as a heavy continuous wall and states that a typical wood fence is not adequate for that credit, so the wall or fence between the properties changes which equipment qualifies.

Breezy prepares the site plan, the equipment data and the AHRI 275 calculation as part of the permit package for Newport Beach addresses and selects equipment that meets the calculated limit for the specific placement.

City of Newport Beach Building DivisionCity of Newport Beach

What it is not

Four boundaries, stated before anyone relies on the report.

Not a home inspection

California defines a home inspection as a noninvasive physical examination of a dwelling's systems and components designed to identify material defects. The Clear-to-Close is an HVAC-only evaluation by a licensed contractor; it adds to that inspection and does not replace it.

Bus. & Prof. Code §7195

Not a code compliance ruling

Permit history and code questions belong to the jurisdiction. The report records what was observed; the permit guide explains who reviews what.

Not a warranty

The report describes the system on the day of the visit. It does not promise how the equipment will perform afterward.

Not a deadline promise

Regular hours are Monday–Friday, 8 AM–5 PM Pacific. Breezy publishes no arrival window and does not promise to meet a contingency deadline.

Common questions

Answers that stay inside what the sources support.

Doesn't the buyer's home inspection already cover the HVAC system?

Partly. California defines a home inspection as a noninvasive physical examination designed to identify material defects, and InterNACHI's standard has the inspector operate heating and cooling with normal controls and report what did not run. The standard states the inspector is not required to determine capacity, distribution, balance or supply adequacy, or to evaluate heat exchangers and flues. The Clear-to-Close answers those questions in writing.

Bus. & Prof. Code §7195InterNACHI standards

When should a seller order it?

Before listing, or before the buyer's inspection period opens. The findings are yours to act on and repairs are your decision. California's disclosure statute counts previously received inspection reports among the facts materially affecting value and desirability, so the report is disclosed either way.

Civil Code §1102.1

When should a buyer order it?

Early in the investigation period. The C.A.R. sample purchase agreement gives the buyer 17 days after acceptance by default to complete investigations and review disclosures, and that number is negotiable. Breezy makes no commitment about meeting a contingency deadline, so ask at the start of the period.

C.A.R. purchase agreement

What does the Clear-to-Close HVAC Inspection cost and what is included?

$175 at regular hours, including the first 2 hours on one system; each additional hour is $175. The fee is waived when approved work or a recommendation exceeds $1,000. A licensed technician operates and measures the heating and cooling system at the property and documents the equipment, its age where legible, how it ran, condition findings and recommended next steps in a written report the buyer, seller or agent can share.

Can the report support a Request for Repair or a credit?

C.A.R. Form RR lets a buyer ask the seller for repairs, a credit or a price change during the investigation period, and the seller has no obligation to agree or to respond. A licensed contractor's written findings give both sides the same facts to work from.

C.A.R. Form RR

Does the seller have to disclose what Breezy finds?

California's disclosure statute names previously received reports of physical inspections among the facts materially affecting value and desirability, and the Transfer Disclosure Statement cannot be waived in an as-is sale. Civil Code Section 1102.4 treats delivery of a licensed contractor's report, on matters within the license, as sufficient compliance for the seller's and agents' error-or-omission exemption on those matters. Ask your agent or attorney how that applies to your transaction.

Civil Code §1102.1Civil Code §1102.4DRE disclosure guide (RE 6)

Is this a home inspection?

No. It is an HVAC-only evaluation by a licensed contractor. It is not a general home inspection, a code compliance ruling or a warranty on the equipment, and the Transfer Disclosure Statement itself says it is not a substitute for inspections the buyer may wish to obtain.

Bus. & Prof. Code §7195DRE disclosure guide (RE 6)

The listing is in Newport Beach and the system may need replacement. What changes?

A mechanical permit to install an A/C condenser in Newport Beach requires a noise analysis with the plans: the unit's decibel rating, the distance to the neighbor's nearest window or outdoor living area and the barrier between the properties. The calculated level must stay within the Municipal Code limit for that placement. Breezy prepares the site plan, the equipment data and the calculation as part of the permit package and selects equipment that meets the limit.

City of Newport Beach Building DivisionCity of Newport Beach

There is already a replacement quote in the file. Can you review it?

Yes. The written replacement-quote review is free and remote: equipment match to the home, scope, exclusions, warranty terms and whether a permit line item appears. It is a document review and cannot verify the condition of the installed system; the Clear-to-Close does that on site.

ACCA Manual J

The next measured step

Closing date on the calendar?

Send the property address, the contingency or close date, the inspection report language and who meets us at the door. Mention Clear-to-Close. Breezy confirms availability inside regular hours, Monday–Friday, 8 AM–5 PM Pacific.